Special state

When " " appears on the screen, tap this icon (a) to check the details.

"Special State" window appears.

Tap (b) to close the window.

All the possible states are shown for description on this page.

In the actual screen, only the states occurring at that time appears.

NOTE:
Some icons may not appear, depending on air conditioner.

Icon	Description	Status
	New firmware update	You can update the firmware of the air conditioner. To check available versions, tap "Confirm". The screen moves to Firmware information.
	Prohibition	Operation from this app is prohibited by the central controller.
	Defrost	At Heating operation, the outdoor unit performs the defrost operation. The indoor unit fan stops during this time.
	Oil recovery	The outdoor unit is performing the oil recovery operation. The indoor unit fan may stop during this time.
	Mode mismatch	The modes of the indoor units differ from each other, and these cannot be used simultaneously in the same system. Change the operation mode to that can be used simultaneously, such as the Fan mode.
	Maintenance	The indoor unit is under maintenance. The indoor unit operation stops at this time.
	Demand control	The air conditioner is in the demand control mode. For details, refer to the instruction manual for the demand control.
	Pump down	The outdoor unit is performing the pump-down operation. The indoor unit operation stops at this time.
	Check operation	The indoor unit is under inspection. The indoor unit operation stops at this time.